Cisco 7206VXR Installation Guide - Page 112
Aligning the Adapter Metal Carrier Between the Slot Guides, Step 3, Caution
UPC - 746320975061
View all Cisco 7206VXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Replacing a Port Adapter or Service Adapter Chapter 5 Maintaining the Cisco 7206 Figure 5-3 Aligning the Adapter Metal Carrier Between the Slot Guides H6597 Slot guide 2 1 ENABLED 0 5 3 1 ENABLED PCMCIA 3 0 1 LINK 2 3 ENABLED ETHERNET 10BT SLOT 1 EJECT SLOT 0 MII FE II MEN RJE4N5 RJL4IN5K R 1O POWK RJ-45 CPU RESET 0 0 MII 1 LINK RJ45 2 TOKEN RING 6 FAST ETHERNET 4 2 FAST ETHERNET INPUT/OUTPUT CONTROLLER 3 Step 3 Step 4 Note: This adapter alignment applies to any port or service adapter. Align the left and right edge of the adapter's metal carrier between the guides in the port adapter slot. (Refer to Figure 5-3.) With the metal carrier aligned in the slot guides, gently slide the port adapter half way into the port adapter slot. If you are installing a service adapter, carefully slide the service adapter all the way into the slot until the adapter is seated in the router midplane and continue from Step 7. Caution Do not slide the port adapter all the way into the slot until you have connected all required cables. Attempting to do so will disrupt normal operation of the router. Step 5 With the port adapter half way in the slot, connect all required cables to the port adapter. Note For connection equipment, signaling, and pinout information for a specific port adapter type, refer to the configuration note for the port adapter. For example, connection equipment, signaling, and pinout information for the Fast Ethernet port adapter is contained in the configuration note PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration. This configuration note is available on Cisco.com. Step 6 After connecting the cables, carefully slide the port adapter all the way into the slot until the adapter is seated in the router midplane. Cisco 7206 Installation and Configuration Guide 5-6 OL-5102-02