Cisco AIR-AP1121G-A-K9 Hardware Installation Guide - Page 61
Message, Ethernet, Status, Radio, Meaning, No Cisco IOS image file. - factory reset
UPC - 746320862613
View all Cisco AIR-AP1121G-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 5 Troubleshooting Autonomous Access Points Checking the Autonomous Access Point LEDs Table 5-1 Top Panel LED Signals Message type Boot loader status Ethernet LED Green - - Association status Amber Green - - Operating status Boot Loader Errors Operation Errors - Green Blinking green Red - Red Amber Red Amber - Blinking amber - Configuration - Reset Failure Red Status LED - Amber Blinking green Green Green Green Blinking green Green - - - Red Red Green Green Amber Green - Blinking amber Amber Red Firmware - Red Upgrade Radio LED Green Red Blinking green - Green - - Blinking green - - Meaning DRAM memory test. Board initialization test Flash memory test. Ethernet initialization test. Starting Cisco IOS. At least one wireless client device is associated with the unit. No client devices are associated; check the unit's SSID and WEP settings. Transmitting/receiving radio packets. Ethernet link is operational. Transmitting/receiving Ethernet packets. Red Red - Amber Red Amber Blinking amber - DRAM memory test failure. File system failure. Ethernet failure during image recovery. Boot environment error. No Cisco IOS image file. Boot failure. Maximum retries or buffer full occurred on the radio. Transmit/receive Ethernet errors. - General warning. - Resetting the configuration options to factory defaults. Red Firmware failure; try disconnecting and reconnecting unit power. - Loading new firmware image. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 5-3