Cisco AIR-AP352E2R Data Sheet - Page 8

Table 1 Cisco Aironet 350 Series Specifications Part Numbers Data Rates Supported Network Standard Uplink Frequency Band Network Architecture Types Wireless Medium Media Access Protocol Modulation Operating Channels Non-overlapping Channels Receive Sensitivity Delay Spread Available Transmit Power Settings Range (typical @ 100-mW transmit power setting with 2.2 dBi diversity dipole antenna) Compliance AIR-AP352E2C, the standard AP AIR-AP352E2R-A-K9, the rugged AP configured for operation in most of the Americas AIR-AP352E2R-E-K9, the rugged AP configured for operation in most of Europe AIR-AP352E2R-J-K9, the rugged AP configured for operation in Japan AIR-AP352E2R-S-K9, the rugged AP configured for operation in Singapore and France For more details on country specific ordering information see the following link: http://www.cisco.com/go/aironet/compliance 1, 2, 5.5, and 11 Mbps IEEE 802.11b Auto-sensing 10/100BaseT Ethernet 2.4 to 2.497 GHz Infrastructure Direct Sequence Spread Spectrum (DSSS) Carrier sense multiple access with collision avoidance (CSMA/CA) DBPSK @1 Mbps; DQPSK @ 2 Mbps; CCK @ 5.5 and 11 Mbps North America: 11; ETSI: 13; Japan: 14 Three 1 Mbps: -94 dBm 2 Mbps: -91 dBm 5.5 Mbps: -89 dBm 11 Mbps: -85 dBm 1 Mbps: 500 ns 2 Mbps: 400 ns 5.5 Mbps: 300 ns 11 Mbps: 140 ns 100 mW (20 dBm) 50 mW (17 dBm) 30 mW (15 dBm) 20 mW (13 dBm) 5 mW (7 dBm) 1 mW (0 dBm) Maximum power setting will vary according to individual country regulations. Indoor: 130 ft (39.6 m) @ 11 Mbps 350 ft (107 m) @ 1 Mbps Outdoor: 800 ft (244 m) @ 11 Mbps 2000 ft (610 m) @ 1 Mbps Operates license free under FCC Part 15 and complies as a Class B device; complies with DOC regulations; complies with ETS 300.328, FTZ 2100, and MPT 1349 standards; rugged version complies with UL 2043 Cisco Systems, Inc. All contents are Copyright © 2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement. Page 8 of 10