Cisco AIR-AP521G-A-K9 Configuration Guide - Page 50
Create, Voice, Guest, Broadcast in Beacon, Con RADIUS Server Pop-Up Message
UPC - 882658161988
View all Cisco AIR-AP521G-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Creating a New WLAN Chapter 4 Creating and Modifying WLANs and VLANs Step 7 Step 8 To configure a secondary RADIUS server, repeat Steps 5 and 6. When done entering RADIUS servers information, click OK and a pop-up message (see Figure 4-5) appears asking if you want to create SSIDs using the RADIUS server. Figure 4-5 Configure RADIUS Server Pop-Up Message Step 9 Click Yes on the pop-up message and the WLANs (SSIDs) window appear again (see Figure 4-1). Step 10 Click Create to create a WLAN and Figure 4-6 appears. Figure 4-6 Create WLAN Window Step 11 Choose the WLAN type by checking Data, Voice, or Guest. Note For voice or data WLAN types, the VLAN ID is automatically selected. Step 12 Enter an SSID in the SSID field (up to 32 alphanumeric characters without spaces). Note For the guest WLAN type, the SSID can contain a space character but not a leading or trailing space character. Step 13 Uncheck Broadcast in Beacon if you don't want the SSID included in the beacon packets. Cisco 500 Series Wireless Express Mobility Controller Configuration Guide 4-4 OL-15283-01