Cisco AIR-LAP1142N-N-K9 Hardware Installation Guide - Page 45
Using the Desktop Holster
View all Cisco AIR-LAP1142N-N-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 3 Mounting Instructions Using the Desktop Holster Step 6 Position the mounting bracket over the partition wall and adjust it to fit. See Figure 3-8. Figure 3-8 Cubicle Wall Bracket 81223 Using the Desktop Holster Follow these steps to mount the access point on a desktop or other horizontal surface using the supplied desktop holster. Step 1 Step 2 Step 3 Select a suitable location to place the holster. Connect the Ethernet and power cables. • If you are going to secure the access point with a Kensington lock, attach it now. Position the holster so that its back side is facing you. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-9
3-9
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
OL-4309-07
Chapter 3
Mounting Instructions
Using the Desktop Holster
Step 6
Position the mounting bracket over the partition wall and adjust it to fit. See
Figure 3-8
.
Figure 3-8
Cubicle Wall Bracket
Using the Desktop Holster
Follow these steps to mount the access point on a desktop or other horizontal surface using the supplied
desktop holster.
Step 1
Select a suitable location to place the holster.
Step 2
Connect the Ethernet and power cables.
•
If you are going to secure the access point with a Kensington lock, attach it now.
Step 3
Position the holster so that its back side is facing you.
81223