Cisco AIR-LAP1242AG-A-K9 Data Sheet - Page 7

Data Sheet Item Antenna Connectors Status LEDs Dimensions (W x L x H) Weight Environmental System Memory Input Power Requirements Powering Options Power Draw Warranty Wi-Fi Certification Specification ICES-003 (Canada) VCCI (Japan) EN 301.489-1 and -17 (Europe) EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC Security: 802.11i, WPA2, WPA 802.1X AES, TKIP Other: IEEE 802.11g and IEEE 802.11a FCC Bulletin OET-65C RSS-102 2.4 GHz Dual RP-TNC connectors 5 GHz Dual RP-TNC connectors Status LED indicates operating state, association status, error/warning condition, boot sequence, and maintenance status. Ethernet LED indicates status of activity over the Ethernet. Radio LED indicates status of activity over the radio. 6.6 x 8.5 x 1.1 in. (16.76 x 21.59 x 2.79 cm) 2.0 lbs Non-operating (storage) temperature: -40 to 185°F (-40 to 85°C) Operating temperature: -4 to 131°F (-20 to 55°C) Operating humidity: 10 to 90 percent (non-condensing) 32 MB RAM 16 MB flash 100 to 240 VAC; 50 to 60Hz (power supply) 36 to 57 VDC (device) Local power 802.3 AF switches Cisco higher-power switches capable of supporting 13W or greater Cisco Aironet power injectors (PWRINJ3 and PWRINJ-FIB) Third-party PoE devices (must meet input power and power draw requirements) 12.95W maximum Note: 12.95W is the maximum power required at the powered device. If the access point is being used in a PoE configuration, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point and cabling) to 15.4W. One year System Requirements Table 3 lists the system requirements for Cisco Aironet 1240AG Series Access Points. Table 3. System Requirements for Cisco Aironet 1240AG Series Access Points Access Method Browser PoE Description Using the Web browser management GUI requires a computer running Internet Explorer Version 6.0 or later, or Netscape Navigator Version 7.0 or later. Power sourcing equipment compliant with Cisco inline power or IEEE 802.3af, and providing at least 12.94W at 48 VDC All contents are Copyright © 1992-2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 9