Cisco ASA5500-HW Installation Guide - Page 9

About This Guide Blank Faceplates and Cover Panels Warning Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029 Product Disposal Warning Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Short-Circuit Protection Warning Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Compliance with Local and National Electrical Codes Warning Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 DC Power Connection Warning Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8 AC Power Disconnection Warning Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units. Statement 246 TN Power Warning Warning The device is designed to work with TN power systems. Statement 19 Cisco ASA 5500-X Series Hardware Installation Guide ix