Cisco ATA186-I1 Administration Guide - Page 28

Software Features Chapter 1 Cisco Analog Telephone Adaptor Overview Table 1-1 Pre-call Services and Where to Find End-user Procedures Service Voice mail access Change access code Forward all calls to another number Cancel the forwarding of all calls Redial the most recent number dialed Use speed dial Answer a call in your call-pickup group Answer a call outside of your call-pickup group Set up a conference Procedure Reference Access Voicemail, page A-2 Change Your Pre-Call Service Access Code, page A-2 Activate Call-Forward-All, page A-2 Cancel Call-Forward-All, page A-2 Redial, page A-2 Speed Dial, page A-3 Call Pickup, page A-3 Group Call Pickup, page A-3 MeetMe Conference, page A-4 Mid-call Services The method of initiating and using mid-call services for the SCCP protocol differs according to mode. The following three modes are available for invoking mid-call services: • Bellcore Style (default) • Cisco VG248 Style • Cisco ATA Style The mode can be configured using bits 28 and 29 of the ConnectMode parameter (see the "ConnectMode" section on page 5-21). Table 1-2 lists the mid-call services that the Cisco ATA supports for each of the three modes. Table 1-2 also includes references to where the end-user procedure is described for each service. Table 1-2 Mid-call Services and Where to Find End-user Procedures Style and Related Services Bellcore style (default) services: • Call transfer • Conference call Cisco VG248 style services: • Three-way call • Call transfer • Conference call Cisco ATA style services: • Call hold/resume • Call transfer • Conference call Procedure Reference Bellcore Style, page A-4 Cisco VG248 Style, page A-5 Cisco ATA Style, page A-6 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0) 1-8 OL-4652-01