Cisco BEFSR81 User Guide - Page 14

Chapter 2 being "fingered" must have placed his or her profile on the system in order for the information to be available. Fingering requires entering the full user@domain address. HTTP (HyperText Transport Protocol) The communications protocol used to connect to servers on the World Wide Web. Its primary function is to establish a connection with a web server and transmit HTML pages to the client web browser. POP3 (Post Office Protocol 3) A standard mail server commonly used on the Internet. It provides a message store that holds incoming e-mail until users log on and download it. POP3 is a simple system with little selectivity. All pending messages and attachments are downloaded at the same time. POP3 uses the SMTP messaging protocol. NNTP (Network News Transfer Protocol) The protocol used to connect to Usenet groups on the Internet. Usenet newsreaders support the NNTP protocol. SNMP (Simple Network Management Protocol) A widely used network monitoring and control protocol. Data is passed from SNMP agents, which are hardware and/or software processes reporting activity in each network device (hub, router, bridge, etc.), to the workstation console used to oversee the network. The agents return information contained in a MIB (Management Information Base), which is a data structure that defines what is obtainable from the device and what can be controlled (turned off, on, etc.). Ext. Port. Enter the number of the external port used by the server in the Ext. Port column. Check with the Internet application documentation for more information. TCP or UDP Select the protocol UDP or TCP for each application. You cannot select both protocols. Int. Port Enter the number of the internal port used by the server in the Int. Port column. Check with the Internet application software documentation for more information. IP Address Enter the IP address of the server that you want the Internet users to be able to access. Enabled Select Enabled to enable the service you have defined. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Applications and Gaming > DMZ The DMZ feature allows one network computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The Port Range Forwarding feature is more secure because it only opens the ports you want to have opened, EtherFast Cable/DSL Router with 8-Port Switch Advanced Configuration while DMZ hosting opens all the ports of one computer, exposing the computer to the Internet. Applications and Gaming > DMZ DMZ Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP address assigned to it because its IP address may change when using the DHCP function. DMZ To disable DMZ hosting, keep the default, Disable. To expose one PC, select Enable. Then configure the following setting: DMZ Host IP Address Enter the IP address of the computer you want to expose. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Applications and Gaming > QoS Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as videoconferencing. 11