Cisco C3230-1W-49-K9 Hardware Guide - Page 49
Fast Ethernet Switch Mobile Interface Card
View all Cisco C3230-1W-49-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4 C H A P T E R Fast Ethernet Switch Mobile Interface Card The Fast Ethernet Switch Mobile Interface Card is a mobile interface card (MIC) in a standard PC/104-Plus form factor. FESMICs are components of the Cisco 3200 Series Mobile Access Router. The 4-port FESMIC provides four sets of switched Fast Ethernet signals. The 2-port FESMIC provides two sets of switched Fast Ethernet signals. The key features of the FESMIC include the following: • Autosensing of switched Fast Ethernet interfaces. • Auto-MDIX (medium-dependent interface crossover). Auto-MDIX automatically detects and corrects crossed Ethernet cabling. • Support for 802.1D standard bridging, 802.1Q trunking, and 802.1P class of service (CoS). • Layer 3 routing support between VLANs. Only one FESMIC is supported in a Cisco 3200 Series router. Additional cards and components provide power and link interfaces to the FESMIC. The exact configuration of your router will vary, depending on how your vendor configured it. Note This section provides basic information about the FESMIC hardware for the purpose of performing simple troubleshooting, such as reconnecting a loose cable. To solve more difficult problems, contact your vendor. The FESMIC draws power from the PCI and the ISA connectors. Table 4-1 shows the estimated power consumption. Note that these are theoretical maximum wattages. Table 4-1 FESMIC Estimated Power Consumption Voltage +5.0 V +3.3 V Current Draw 0.2 A 2.3 A Power 1.0 W 7.7 W Source ISA and PCI connectors PCI connectors OL-5816-10 Cisco 3200 Series Router Hardware Reference 4-1