Cisco CISCO826 Hardware Installation Guide - Page 44

Where to Go from Here Chapter 2 Installation Table 2-4 Verifying Installation (continued) Power/Link LEDs To Check Normal Patterns To digital telephone LINE, CH1, CH1 RXD, CH1 TXD, CH2, CH2 RXD, and CH2 TXD • LINE, CH1, and CH2: On. CH1 or CH2 is on when the router has an active voice connection. • CH1 RXD, CH2 RXD: Blinking when indicated ISDN B channel receives a packet. To analog PH1 and PH21 telephone, fax, or modem • CH1 TXD, CH2 TXD: Blinking when indicated ISDN B channel sends a packet. On when telephone, fax, or modem is in use. 1. You can also pick up the handset and listen for a dial tone. Where to Go from Here You have completed the hardware installation and are ready to configure the software. Cisco strongly recommends that inexperienced network administrators use the Cisco 800 Fast Step application. Use the Cisco 800 Fast Step CD-ROM and online help. If you are an experienced network administrator and want to use the CLI to configure the software, refer to the Cisco 800 Series Routers Software Configuration Guide. 2-22 Cisco 800 Series Routers Hardware Installation Guide 78-5373-04