Cisco CISCO877-SEC-K9 Configuration Guide - Page 133
Configuring Dial Backup and Remote Management, PC IP address behind CPE.
UPC - 882658021817
View all Cisco CISCO877-SEC-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 13 Configuring Dial Backup and Remote Management Configuring Dial Backup and Remote Management Through the Console or Auxiliary Port ! PC IP address behind CPE. access-list 101 permit ip 192.168.0.0 0.0.255.255 any access-list 103 permit ip 192.168.0.0 0.0.255.255 any ! ! Watch multiple IP addresses because peers are alternated ! among them when the CPE is connected. dialer watch-list 1 ip 64.161.31.254 255.255.255.255 dialer watch-list 1 ip 64.174.91.254 255.255.255.255 dialer watch-list 1 ip 64.125.91.254 255.255.255.255 ! ! Dial backup will kick in if primary link is not available ! 5 minutes after CPE starts up. dialer watch-list 1 delay route-check initial 300 dialer-list 1 protocol ip permit ! ! Direct traffic to an interface only if the dialer is assigned an IP address. route-map main permit 10 match ip address 101 match interface Dialer1 ! route-map secondary permit 10 match ip address 103 match interface Dialer3 ! ! Change console to aux function. line con 0 exec-timedout 0 0 modem enable stopbits 1 line aux 0 exec-timeout 0 0 ! To enable and communicate with the external modem properly. script dialer Dialout modem InOut modem autoconfigure discovery transport input all stopbits 1 speed 115200 flowcontrol hardware line vty 0 4 exec-timeout 0 0 password cisco login ! scheduler max-task-time 5000 end OL-5332-01 Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide 13-15