Cisco CISCO881G-K9 Hardware Installation Guide - Page 29

Chapter 1 Product Overview Cisco 890 Series ISRs 3 Voice ports-four FXS/DID ports and one FXO port. 4 Fast Ethernet LAN-four ports 5 Console Port 8 Power connector 9 Earth ground connection 10 Kensington security slot Cisco 890 Series ISRs The Cisco 890 series ISRs have the following features: • Integrated 8-port 10/100 Ethernet switch for connecting to the LAN • 10/100 FE and 10/100/1000 Gigabit Ethernet (GE) port for connecting to the WAN • Separate console and auxiliary ports • Optional embedded Wi-Fi CERTIFIED™ dual radio 802.11a/b/g/n-compliant wireless AP • Optional 4-port PoE Note The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 through 3. If this feature was not configured with the factory order you must order and install it to enable the PoE function. • Security feature card (SFC) socket • DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB system memory in Cisco 891 and 892 series ISRs, and a total of 1 GB system memory in Cisco 892F series ISRs • Three reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel for non-captive dual-band WLAN antenna (wireless models only) • Supports the AIM2-CUE-K9 and AIM2-APPRE-104-K9 • Gigabit Ethernet (GE) small-form-factor pluggable (SFP) port (Cisco 892F series ISRs only) The following feature is located on the front panel: • Two USB 1.1 ports Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-07 1-15