Cisco CISCO881W-GN-A-K9 Hardware Installation Guide - Page 48
Symptom, Problem, Solutions, Connecting an, ISDN Line, Installation, Connecting a Digital, Telephone
View all Cisco CISCO881W-GN-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Problems After First Startup Chapter 3 Troubleshooting Table 3-2 Problems After First Startup (continued) Symptom Problem Solutions • One of the following Perform the following tasks in the following cable-related order: problems: • To make sure you have cabled the ISDN or - Improperly IDSL port correctly, see the "Connecting an connected cable. ISDN Line" or "Connecting an IDSL Line" - Damaged cable. sections in Chapter 2, "Installation." • Make sure the connectors at both ends of each cable are securely connected. • Make sure each cable is not physically damaged. If it is, replace it with a similar cable. • Problem with ISDN or IDSL line. • Contact your telephone or Internet service provider to determine if there is a problem with your line. • If the problem continues, call your Cisco reseller. No link to digital telephone. • One of the following Perform the following tasks in the following cable-related order: problems: • To make sure you have cabled the port - Improperly correctly, see the "Connecting a Digital connected cable. Telephone" section in Chapter 2, - Damaged cable. "Installation." • Make sure the connectors at both ends of each cable are securely connected. • Make sure each cable is not physically damaged. If it is, replace it. • Problem with ISDN line. • Contact your telephone service provider to determine if there is a problem with your line. • If the problem continues, call your Cisco reseller. No link to analog telephone, fax machine, or modem. (PH1 or PH2 LED on Cisco 803 and 804 routers is off.) • One of the following Perform the following tasks in the following cable-related order: problems: • To make sure you have cabled the telephone - Improperly port correctly, see the "Connecting an connected cable. Analog Telephone, Fax, or Modem" section - Damaged cable. in Chapter 2, "Installation." • Make sure the connectors at both ends of the cable are securely connected. • Make sure the cable is not physically damaged. If it is, replace it. Cisco 800 Series Routers Hardware Installation Guide 3-4 78-5373-04