Cisco CISCO887W-GN-A-K9 Brochure - Page 6

Data Sheet, Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set Default

Page 6 highlights

Data Sheet Tables 5 and 6 list software features of the Cisco 880 Series. Table 5. Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default) Feature Description IP and IP services features ● Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2) ● Generic routing encapsulation (GRE) and Multipoint GRE (MGRE) ● Cisco Express Forwarding ● Standard 802.1d Spanning Tree Protocol ● Layer 2 Tunneling Protocol (L2TP) ● Network Address Translation (NAT) ● Dynamic Host Configuration Protocol (DHCP) server, relay, and client ● Dynamic Domain Name System (DNS) ● DNS Proxy ● DNS Spoofing ● Access control lists (ACLs) ATM features (ADSL and G.SHDSL ATM models only) ● ATM Variable Bit Rate real-time (VBR-rt) ● ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate non-realtime (VBR- nrt) ● ATM operations, administration, and maintenance (OA&M) support for F5 Continuity Check; segment and end-to-end loopback; and Integrated Local Management Interface (ILMI) support ● TX ring adjustment ● Virtual-circuit (VC) bundling ● Per-VC queuing ● Per-VC traffic shaping ● 20 ATM virtual circuits ● RFCs 1483 and 2684 ● Point-to-Point Protocol over ATM (PPPoA) ● PPP over Ethernet (PPPoE) Switch features ● Auto Media Device In/Media Device Cross Over (MDI-MDX) ● Eight 802.1Q VLANs ● MAC filtering ● Two-port 802.3af and Cisco compliant PoE ● Switched Port Analyzer (SPAN) ● Storm Control ● Smartports Security features Secure connectivity: ● Secure Sockets Layer (SSL) VPN for secure remote access ● Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256 ● Public-key-infrastructure (PKI) support ● 20 IPsec tunnels ● Cisco Easy VPN Client and Server ● NAT transparency Zone-based policy firewall: ● Stateful inspection transparent firewall ● Advanced application inspection and control ● HTTPS, FTP, and Telnet authentication proxy ● Dynamic and static port security QoS features ● Low-Latency Queuing (LLQ) ● Weighted Fair Queuing (WFQ) ● Class-Based WFQ (CBWFQ) ● Class-Based Traffic Shaping (CBTS) (On Fast Ethernet WAN ports and DSL ports in Packet Transport Mode [PTM] only) ● Class-Based Traffic Policing (CBTP) ● Policy-Based Routing (PBR) ● Class-Based QoS MIB ● Class of service (CoS)-to-differentiated services code point (DSCP) mapping © 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 16
Tables 5 and 6 list software features of the Cisco 880 Series.
Table 5.
Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default)
Feature
Description
IP and IP services features
Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
Generic routing encapsulation (GRE) and Multipoint GRE (MGRE)
Cisco Express Forwarding
Standard 802.1d Spanning Tree Protocol
Layer 2 Tunneling Protocol (L2TP)
Network Address Translation (NAT)
Dynamic Host Configuration Protocol (DHCP) server, relay, and client
Dynamic Domain Name System (DNS)
DNS Proxy
DNS Spoofing
Access control lists (ACLs)
ATM features (ADSL and G.SHDSL ATM
models only)
ATM Variable Bit Rate real-time (VBR-rt)
ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate non-realtime (VBR-
nrt)
ATM operations, administration, and maintenance (OA&M) support for F5 Continuity Check; segment
and end-to-end loopback; and Integrated Local Management Interface (ILMI) support
TX ring adjustment
Virtual-circuit (VC) bundling
Per-VC queuing
Per-VC traffic shaping
20 ATM virtual circuits
RFCs 1483 and 2684
Point-to-Point Protocol over ATM (PPPoA)
PPP over Ethernet (PPPoE)
Switch features
Auto Media Device In/Media Device Cross Over (MDI-MDX)
Eight 802.1Q VLANs
MAC filtering
Two-port 802.3af and Cisco compliant PoE
Switched Port Analyzer (SPAN)
Storm Control
Smartports
Security features
Secure connectivity:
Secure Sockets Layer (SSL) VPN for secure remote access
Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
Public-key-infrastructure (PKI) support
20 IPsec tunnels
Cisco Easy VPN Client and Server
NAT transparency
Zone-based policy firewall:
Stateful inspection transparent firewall
Advanced application inspection and control
HTTPS, FTP, and Telnet authentication proxy
Dynamic and static port security
QoS features
Low-Latency Queuing (LLQ)
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Class-Based Traffic Shaping (CBTS) (On Fast Ethernet WAN ports and DSL ports in Packet
Transport Mode [PTM] only)
Class-Based Traffic Policing (CBTP)
Policy-Based Routing (PBR)
Class-Based QoS MIB
Class of service (CoS)-to-differentiated services code point (DSCP) mapping