Cisco CP-7911G Administration Guide - Page 89

Chapter 3 Setting Up the Cisco Unified IP Phone Mounting the Phone to a Wall Mounting the Phone to a Wall You can mount the Cisco Unified IP Phone on a wall using the back of the phone as a mounting bracket or you can use special brackets available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be ordered separately from the phones.) If you attach the phone to a wall using the back of the phone and not the wall mount kit, you need to supply the following tools and parts: • Screwdriver • Screws to secure the Cisco Unified IP phone to the wall Before You Begin To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which the handset catches when the phone is vertical. For an illustrated procedure, refer to the Installing the Universal Wall Mount Kit for the Cisco Unified IP Phone document. Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs. Procedure Step 1 Step 2 Step 3 Remove the footstand if it is attached to the phone. Insert two screws into a wall stud, matching them to the two screw holes on the back of the phone. Hang the phone on the wall. OL11954-01 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 3-15