Cisco CP-7940G-CH1 Administration Guide - Page 98
Network Configuration, Table 7-2, Configuring Network Settings on the Cisco
View all Cisco CP-7940G-CH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Network Configuration Chapter 7 Monitoring the Cisco Unified IP Phone Remotely Table 7-1 Device Information Area Items (continued) Item Boot Load ID Version Expansion Module 1 Expansion Module 2 Hardware Revision Serial Number Model Number Codec Amps C3PO Revision Message Waiting Description Identifier of the factory-installed load running on the phone Version of the phone hardware Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914, if connected to the phone Phone load ID for the second Cisco Unified IP Phone Expansion Module 7914, if connected to the phone Version of the phone hardware Serial number of the phone Model number of the phone Codec used by the phone Indicates whether 3 volt or 5 volt amplifier is being used by the phone Revision of the Cisco 3 port switch in the phone Indicates if there is a voice message waiting on any line for this phone Network Configuration The Network Configuration area on a phone's web page displays network configuration information and information about other phone settings. Table 7-2 describes these items. You can view and set many of these items from the Network Configuration Menu the Cisco Unified IP Phone. For more information, see Chapter 4, "Configuring Network Settings on the Cisco Unified IP Phone." To display the Network Configuration area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 7-2, and then click the Network Configuration hyperlink. Table 7-2 Network Configuration Area Items Item DHCP Server BOOTP Server MAC Address Host Name Domain Name IP Address Subnet Mask TFTP Server 1 Description IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone obtains its IP address. Indicates whether the phone obtains its configuration from a Bootstrap Protocol (BootP) server. Media Access Control (MAC) address of the phone. Host name that the DHCP server assigned to the phone. Name of the Domain Name System (DNS) domain in which the phone resides. Internet Protocol (IP) address of the phone. Subnet mask used by the phone. Primary Trivial File Transfer Protocol (TFTP) server used by the phone. Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP) 7-4 OL-15498-01