Cisco HWIC-1FE Network Guide - Page 2
Fast Ethernet HWICs Supported Platforms, Fast Ethernet HWICs Port Numbering, Chassis, HWIC-1FE - card
UPC - 882658097140
View all Cisco HWIC-1FE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Cisco 1- and 2-Port Fast Ethernet HWICs Connecting 1- and 2-Port Fast Ethernet High-Speed WAN Interface Cards to the Network • Connectivity fault management (CFM) • Flow control • Online insertion and removal (OIR) Fast Ethernet HWICs Supported Platforms Install the Fast Ethernet HWICs in the following Cisco routers: • Cisco 1841 integrated services router • Cisco 2800 series integrated services routers • Cisco 3800 series integrated services routers Note Insert Fast Ethernet HWICs into HWIC slots only. They do not fit into WIC/VIC slots. Table 1 shows the maxmum number of each type of HWIC that may be installed, the slot locations, and slot numbering for each platform. For information about HWIC slot locations on each router, see the "Interface Card Slot Locations and Numbering on Cisco Access Routers" section of the Cisco Interface Cards for Cisco Access Routers guide located at: http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.ht ml Table 1 Supported Platforms for Fast Ethernet HWICs Chassis Cisco 1841 Cisco 2801 Cisco 2811 Cisco 2821 Cisco 2851 HWIC-1FE 1 may be installed 1 to 2 may be installed 1 to 2 may be installed 1 to 2 may be installed 1 to 2 may be installed HWIC-2FE 1 may be installed1 1 may be installed1 1 may be installed1 1 may be installed1 1 may be installed1 Cisco 3825 1 to 4 may be installed 1 to 2 may be installed Cisco 3845 1 to 4 may be installed 1 to 2 may be installed 1. Requires Cisco IOS Release 12.4(24)T or later. HWIC slots Slot 0 and slot 1 Slot 1 and slot 3 support HWICs Slot 0 to slot 3 Slot 0 to slot 3 Slot 0 to slot 3 Slot 0 to slot 3 Slot 0 to slot 3 Fast Ethernet HWICs Port Numbering Port numbers identify the interfaces on the modules and interface cards installed in the router. Modules and interface cards are identified by three digits: slot number/subslot number/port number. For example, HWIC port 0 in HWIC subslot 1 of router slot 0 is represented as: interface FastEthernet 0/1/0 OL-12851-01 2