Cisco PIX 501 Data Sheet - Page 6

Data Sheet, Product Specifications - connect to vpn but cannot access

Page 6 highlights

Data Sheet Table 2. Product Specifications Feature Specifications Software Licenses ● 10-User License ◦ The Cisco PIX 501 10-user license supports up to 10 concurrent source IP addresses from your internal network to traverse through the Cisco PIX 501. The integrated DHCP server supports up to 32 DHCP leases. As your needs grow, both 50 user and unlimited user upgrade licenses are available, allowing you to extend your investment in Cisco PIX 501 equipment. ● 50-User License ◦ The Cisco PIX 501 50-user license supports up to 50 concurrent source IP addresses from your internal network to traverse through the Cisco PIX 501. The integrated DHCP server supports up to 128 DHCP leases. As your needs grow, a 50-to-unlimited user upgrade license is also available, allowing you to further extend your investment in Cisco PIX 501 equipment. ● Unlimited User License ◦ The PIX 501 unlimited user license supports an unlimited number of devices from your internal network to traverse through the Cisco PIX 501. The integrated DHCP server supports up to 256 DHCP leases. ● 3DES/AES and DES Encryption Licenses ◦ The Cisco PIX 501 Security Appliance has two optional encryption licenses-one license (PIX-501-VPN-3DES) enables 168-bit 3DES and up to 256-bit AES encryption, the other license (PIX-VPN-DES) enables 56-bit DES encryption. Both are available either at the time of ordering the Cisco PIX 501 Security Appliance, or can be obtained subsequently through Cisco.com. Note that an encryption license must be installed to activate encryption services which are required before using certain features including VPN and secure remote management. Performance Summary ● Cleartext throughput: Up to 60 Mbps ● Concurrent connections: 7,500 ● 56-bit DES IPsec VPN throughput: Up to 6 Mbps ● 168-bit 3DES IPsec VPN throughput: Up to 3 Mbps ● 128-bit AES IPsec VPN throughput: Up to 4.5 Mbps ● Simultaneous VPN peers: 10* * Maximum number of simultaneous site-to-site or remote access IKE Security Association (SAs) supported Technical Specifications ● Processor: 133-MHz AMD SC520 Processor ● Random access memory: 16 MB of SDRAM ● Flash memory: 8 MB ● System bus: Single 32-bit, 33-MHz PCI Environmental Operating Ranges ● Operating ◦ Temperature: 32 to 104°F (0 to 40°C) ◦ Relative humidity: 10 to 90 percent, noncondensing ◦ Altitude: 0 to 6500 feet (2000 m) ◦ Shock: 250 G, < 2 ms ◦ Vibration: 0.41 Grms2 (3-500 Hz) random input ● Nonoperating ◦ Temperature: -4 to 149°F (-20 to 65°C) ◦ Relative humidity: 10 to 90 percent, noncondensing ◦ Altitude: 0 to 15000 feet (4570 m) ◦ Shock: 65 G, 8 ms ◦ Vibration: 1.12 Grms2 (3-500 Hz) random input Power ● Input ◦ Range Line Voltage: 100V to 240V AC ◦ Nominal Line Voltage: 100V to 240V AC ◦ Current: 0.051A (at 115V) ◦ Frequency: 50-60 Hz, single phase ◦ Power: 5.9W ● Output ◦ Nominal Line Voltage: 3.3V DC ◦ Current: 1.5A ◦ Steady State: 5W ◦ Maximum Peak: 5W ◦ Maximum Heat Dissipation: 17.0 BTU/hr, full power usage (5W) All contents are Copyright © 1992-2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 8
Table 2.
Product Specifications
Feature
Specifications
Software Licenses
10-User License
The Cisco PIX 501 10-user license supports up to 10 concurrent source IP addresses from
your internal network to traverse through the Cisco PIX 501. The integrated DHCP server
supports up to 32 DHCP leases. As your needs grow, both 50 user and unlimited user
upgrade licenses are available, allowing you to extend your investment in Cisco PIX 501
equipment.
50-User License
The Cisco PIX 501 50-user license supports up to 50 concurrent source IP addresses from
your internal network to traverse through the Cisco PIX 501. The integrated DHCP server
supports up to 128 DHCP leases. As your needs grow, a 50-to-unlimited user upgrade
license is also available, allowing you to further extend your investment in Cisco PIX 501
equipment.
Unlimited User License
The PIX 501 unlimited user license supports an unlimited number of devices from your
internal network to traverse through the Cisco PIX 501. The integrated DHCP server
supports up to 256 DHCP leases.
3DES/AES and DES Encryption Licenses
The Cisco PIX 501 Security Appliance has two optional encryption licenses—one license
(PIX-501-VPN-3DES) enables 168-bit 3DES and up to 256-bit AES encryption, the other
license (PIX-VPN-DES) enables 56-bit DES encryption. Both are available either at the time
of ordering the Cisco PIX 501 Security Appliance, or can be obtained subsequently through
Cisco.com. Note that an encryption license must be installed to activate encryption services
which are required before using certain features including VPN and secure remote
management.
Performance Summary
Cleartext throughput: Up to 60 Mbps
Concurrent connections: 7,500
56-bit DES IPsec VPN throughput: Up to 6 Mbps
168-bit 3DES IPsec VPN throughput: Up to 3 Mbps
128-bit AES IPsec VPN throughput: Up to 4.5 Mbps
Simultaneous VPN peers: 10*
* Maximum number of simultaneous site-to-site or remote access IKE Security Association (SAs)
supported
Technical Specifications
Processor: 133-MHz AMD SC520 Processor
Random access memory: 16 MB of SDRAM
Flash memory: 8 MB
System bus: Single 32-bit, 33-MHz PCI
Environmental Operating
Ranges
Operating
Temperature: 32 to 104°F (0 to 40°C)
Relative humidity: 10 to 90 percent, noncondensing
Altitude: 0 to 6500 feet (2000 m)
Shock: 250 G, < 2 ms
Vibration: 0.41 Grms2 (3–500 Hz) random input
Nonoperating
Temperature: –4 to 149°F (–20 to 65°C)
Relative humidity: 10 to 90 percent, noncondensing
Altitude: 0 to 15000 feet (4570 m)
Shock: 65 G, 8 ms
Vibration: 1.12 Grms2 (3–500 Hz) random input
Power
Input
Range Line Voltage: 100V to 240V AC
Nominal Line Voltage: 100V to 240V AC
Current: 0.051A (at 115V)
Frequency: 50–60 Hz, single phase
Power: 5.9W
Output
Nominal Line Voltage: 3.3V DC
Current: 1.5A
Steady State: 5W
Maximum Peak: 5W
Maximum Heat Dissipation: 17.0 BTU/hr, full power usage (5W)