Cisco RVL200 User Guide - Page 35
Rate Control, Priority, Protocol, Port Range, Max. Rate, Enable
UPC - 745883571888
View all Cisco RVL200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 4 Advanced Configuration Rate Control Service Select the Service you want. If the Service you need is not listed in the menu, click Service Management to add the new service. The Service Management screen appears. Click Add to List, and configure as many rules as you would like, up to a maximum of 100. To delete a rule, select it and click Delete selected application. Click Summary to see a summary of the Rate Control rules. Summary (Rate Control Selected) To change a rule, click Edit. To update the list, click Refresh. To return to the Bandwidth Management screen, click Close. On the Bandwidth Management screen, click Save Settings to save your changes, or click Cancel Changes to undo them. Priority Service Management Service Name Enter a name. Protocol Select the protocol it uses. Port Range Enter its range. Click Add to List. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the Bandwidth Management screen. If you want to modify a service you have created, select it and click Update this service. Make changes. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the Bandwidth Management screen. If you want to delete a service you have created, select it and click Delete selected service. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Exit to return to the Bandwidth Management screen. IP Enter the IP address or range you need to control. To include all internal IP addresses, keep the default, 0. Direction Select Upstream for outbound traffic, or select Downstream for inbound traffic. Min. Rate Enter the minimum rate for the guaranteed bandwidth. Max. Rate Enter the maximum rate for the maximum bandwidth. Enable Select Enable to use this Rate Control rule. 4-Port SSL/IPSec VPN Router QoS > Bandwidth Management > Priority Service Select the Service you want. If the Service you need is not listed in the menu, click Service Management to add the new service. The Service Management screen appears. 27