Cisco SG100-16 Hardware Installation Guide - Page 55
Running the BIOS Setup Utility for the CDE100, Delete, Ctrl-Backspace, Enter
View all Cisco SG100-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE Running the BIOS Setup Utility Running the BIOS Setup Utility for the CDE100 Perform the following steps to run the BIOS setup utility for the CDE100: Step 1 Step 2 Step 3 Power on the CDE100. Insert the CD with the CDS image into the internal CD-ROM drive. Reboot the CDE100 and wait for the initial BIOS screen to appear. Note Step 4 through Step 16 are required only for the initial installation. The BIOS setup does not need to be changed for the second and subsequent installations or recovery. Step 4 To enter the BIOS Setup menu, press Delete as instructed at the bottom of the BIOS screen. The Main menu appears (see Figure 4-1). Figure 4-1 Main Menu Tip If you are viewing the initial BIOS screen through a remote terminal server, Ctrl-Backspace functions the same as the Delete key. Step 5 From the Main menu, choose Boot and press Enter. The Boot Settings menu appears (see Figure 4-2). OL-13478-03 Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide 4-3