Cisco SPA2102-EU Administration Guide - Page 126
Miscellaneous Settings not used with PAP2T), Manual, DHCP/Manual, parallel
View all Cisco SPA2102-EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
ATA Voice Field Reference System page B DNS Server Order DNS Query Mode Specifies the method for selecting the DNS server. The options are Manual (enter the IP address of the DNS server manually; that is do not look at the DHCP-supplied DNS table), Manual/DHCP, and DHCP/Manual. Do parallel or sequential DNS Query. With parallel DNS query mode, the ATA device sends the same request to all the DNS servers at the same time when doing a DNS lookup, the first incoming reply is accepted by the ATA device. Syslog Server Debug Server Debug Level The default is parallel. Specify the syslog server name and port. This feature specifies the server for logging ATA device system information and critical events. If both Debug Server and Syslog Server are specified, Syslog messages are also logged to the Debug Server. The debug server name and port. This feature specifies the server for logging ATA device debug information. The level of detailed output depends on the debug level parameter setting. The higher the debug level, the more debug information is generated. Zero (0) means no debug information is generated. To log SIP messages, Debug Level must be set to at least 2. Primary NTP Server Secondary NTP Server The default is 0. IP address or name of primary NTP server. IP address or name of secondary NTP server. Voice tab > System page > Miscellaneous Settings section (not used with PAP2T) Syslog Server Debug Server Specifies the IP address of the syslog server. Specifies the IP address of the debug server, which logs debug information. The level of detailed output depends on the debug level parameter setting. Cisco Small Business ATA Administration Guide 126