Cisco SPA2102-R3 Administration Guide - Page 44
Resync URL, Reboot URL, protocol, server-name, firmware-pathname, spa.bin, resync? - 3 3 6 firmware
View all Cisco SPA2102-R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Basic Administration and Configuration Upgrading, Rebooting, and Resyncing Your ATA Device 2 If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL is used as server-name. If no port specified, the default port of the protocol is used. (69 for TFTP or 80 for HTTP) The firmware-pathname is typically the file name of the binary located in a directory on the TFTP or HTTP server. If no firmware-pathname is specified, / spa.bin is assumed, as in the following example: http://192.168.2.217/admin/upgrade?tftp://192.168.2.251/spa.bin Resync URL The Resync URL lets you force the ATA device to do a resync to a profile specified in the URL, which can identify either a TFTP, HTTP, or HTTPS server. The syntax of the Resync URL is as follows: http://spa-ip-addr/admin/resync?[[protocol://][server-name[:port]]/profilepathname] NOTE The SPA resyncs only when it is idle. If no parameter follows /resync?, the Profile Rule setting from the Provisioning page is used. If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL is used as server-name. If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443 for HTTPS). The profile-path is the path to the new profile with which to resync, for example: http://192.168.2.217admin/resync?tftp://192.168.2.251/spaconf.cfg Reboot URL The Reboot URL lets you reboot the ATA device. The Reboot URL is as follows: http://spa-ip-addr/admin/reboot NOTE The ATA device reboots only when it is idle. Cisco Small Business ATA Administration Guide 44