Cisco VG248 Software Configuration Guide - Page 95
Suspending SMDI Port Activity - upgrade
UPC - 746320576725
View all Cisco VG248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 5 Integrating Cisco CallManager with Voice Mail Systems Using SMDI Verifying and Troubleshooting the SMDI Connection Step 1 Step 2 From the main menu, choose Diagnostics. Choose Validate SMDI configuration. A window displays with the results of the diagnosis, indicating any errors or warnings. Suspending SMDI Port Activity If you are using the chained configuration and want to temporarily remove one of the VG248 devices or upgrade software on it, you should suspend activity on the SMDI ports before shutting down or restarting the VG248. By suspending activity, the VG248 waits for the port to become idle, then it temporarily removes the port from Cisco CallManager and suspends the port, preventing any activity on it. Once all the ports have been suspended, traffic from Aysnc 1 is also suspended on the device. SMDI traffic from Async 2 from the previous VG248 device in the chain queues up while this device is suspended. Suspending the device does not affect whether ports are enabled or not; if they were enabled before being suspended, they are enabled after being resumed. Before You Begin If after following this procedure, the device is not suspended immediately, it is likely that some of the ports still have active calls or there are pending MWI commands on the Cisco CallManager system. You can check individual ports by pressing Escape to exit the "Suspending..." message and choosing Display > Port Status from the main menu. Step 1 Step 2 Step 3 From the main menu, choose Configure. Choose Suspend. A message appears indicating that the device is being suspended. Shut down, restart, or upgrade software on the VG248, as needed. See "Upgrading Software Images" section on page 6-13 for details. OL-1209-02 Cisco VG248 Analog Phone Gateway Software Configuration Guide 5-31