Cisco VG248 Hardware Installation Guide - Page 8
Objectives, Organization - replacement
UPC - 746320576725
View all Cisco VG248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Objectives About this Guide Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Objectives This guide provides the required steps to install the VG248. You must use this guide in conjunction with the Cisco VG248 Analog Phone Gateway Software Configuration Guide to get the VG248 up and running on your network. Because of the complexity of an IP telephony network, this guide does not provide detailed information for required procedures performed on other Cisco or third-party devices. Refer to the documentation provided with these systems for installation and configuration instructions. Organization Table 1 provides an overview of the organization of this guide. Table 1 Cisco Digital PBX Adapter 7630 Administration Guide Organization Chapter Chapter 1, "Overview" Chapter 2, "Preparing to Install the VG248" Chapter 3, "Installing the VG248" Appendix A, "Regulatory Compliance and Technical Specifications" Appendix B, "Translated Safety Warnings" Description Provides overview of the hardware features and technical specifications of the VG248. Provides information about preparing the site for installation, required tools, and safety information. Describes the steps required to properly and safely install and configure the VG248 in your network. Provides regulatory compliance and technical specifications for the VG248. Provides translations of safety warnings used in this guide. Cisco VG248 Analog Phone Gateway Hardware Installation Guide viii 78-13154-01