Cisco WS-C2950G-24-EI Brochure - Page 13

Feature Y2K Description • 1000BASE-SX • 1000BASE-LX/LH • 1000BASE-ZX • 1000BASE-CWDM GBIC 1470nm • 1000BASE-CWDM GBIC 1490nm • 1000BASE-CWDM GBIC 1510nm • 1000BASE-CWDM GBIC 1530nm • 1000BASE-CWDM GBIC 1550nm • 1000BASE-CWDM GBIC 1570nm • 1000BASE-CWDM GBIC 1590nm • 1000BASE-CWDM GBIC 1610nm • RMON I and II standards • SNMPv1, SNMPv2c, SNMPv3 (planned future support for v3) • Y2K compliant Connectors and Cabling • 10BASE-T ports: RJ-45 connectors; two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling • 100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling • 1000BASE-T ports: RJ-45 connectors; four-pair Category 5 UTP cabling • 100BASE-FX ports: MT-RJ connectors, 50/125 or 62.5/125 micron multimode fiber-optic cabling • 1000BASE-T, 1000BASE-SX, -LX/LH, -ZX GBIC-based ports: SC fiber connectors, single-mode or multimode fiber • Cisco GigaStack GBIC ports: copper-based Cisco GigaStack cabling • Management console port: 8-pin RJ-45 connector, RJ-45-to-RJ-45 rollover cable with RJ-45-to-DB9 adapter for PC connections; for terminal connections, use RJ-45-to-DB25 female data-terminal-equipment (DTE) adapter (can be ordered separately from Cisco, part number ACS-DSBUASYN=) MT-RJ Patch Cables for the Cisco Catalyst 2950C-24 Switch Type of cable; Cisco part number: • 1-meter, MT-RJ-to-SC multimode cable; CAB-MTRJ-SC-MM-1M • 3-meter, MT-RJ-to-SC multimode cable; CAB-MTRJ-SC-MM-3M • 5-meter, MT-RJ-to-SC multimode cable; CAB-MTRJ-SC-MM-5M • 1-meter, MT-RJ-to-ST multimode cable; CAB-MTRJ-ST-MM-1M • 3-meter, MT-RJ-to-ST multimode cable; CAB-MTRJ-ST-MM-3M • 5-meter, MT-RJ-to-ST multimode cable; CAB-MTRJ-ST-MM-5M © 2004 Cisco Systems, Inc. All rights reserved. Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com. Page 13 of 18