Cisco WS-C2960G-8TC-L Hardware Installation Guide - Page 83

3 C H A P T E R Installing and Connecting the Router This document describes how to install and connect Cisco 2900 series and Cisco 3900 series integrated services routers (ISRs) to LAN, WAN, and Voice networks. The following sections provide technical details. • Installing the Router, page 3-4 • Chassis Grounding, page 3-15 • Connecting Power, page 3-18 • Connecting to a Console Terminal or Modem, page 3-31 • Installing the Cisco Microsoft Windows USB Device Driver, page 3-36 • Uninstalling the Cisco Microsoft Windows USB Driver, page 3-38 • Connecting to the Auxiliary Port, page 3-39 • Connecting WAN, LAN, and Voice Interfaces, page 3-42 Warning To see translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for Cisco 2900 Series Integrated Services Routers or the Regulatory Compliance and Safety Information for Cisco 3900 Series Integrated Services Routers document. Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028 Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029 Warning Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the unit first. Statement 1026 OL-18712-01 Cisco 2900 and 3900 Series Hardware Installation 3-1