Cisco WS-C3560X-24T-S Command Reference - Page 731
running-config startup-config, vtp client, no vtp transparent, vtp server
View all Cisco WS-C3560X-24T-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 731 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands vtp (VLAN configuration) Command Modes VLAN configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines If the VTP mode is transparent, the mode and domain name are saved in the switch running configuration file, and you can save the configuration in the switch startup configuration file by using the copy running-config startup-config privileged EXEC command. Follow these guidelines when setting the VTP mode: • The no vtp client and no vtp transparent forms of the command return the switch to VTP server mode. • The vtp server command is the same as no vtp client or no vtp transparent except that it does not return an error if the switch is not in client or transparent mode. • If the receiving switch is in client mode, the client switch changes its configuration to duplicate the configuration of the server. If you have switches in client mode, make sure to make all VTP or VLAN configuration changes on a switch in server mode. If the receiving switch is in server mode or transparent mode, the switch configuration is not changed. • Switches in transparent mode do not participate in VTP. If you make VTP or VLAN configuration changes on a switch in transparent mode, the changes are not propagated to other switches in the network. • If you make a change to the VTP or VLAN configuration on a switch in server mode, that change is propagated to all the switches in the same VTP domain. • The vtp transparent command disables VTP from the domain but does not remove the domain from the switch. • The VTP mode must be transparent for you to add extended-range VLANs or for the VTP and the VLAN configurations to be saved in the running configuration file. • If extended-range VLANs are configured on the switch and you attempt to set the VTP mode to server or client, you receive an error message and the configuration is not allowed. • VTP can be set to either server or client mode only when dynamic VLAN creation is disabled. Note VTP configuration in VLAN configuration mode is saved in the VLAN database when applied. 78-16405-05 Catalyst 3560 Switch Command Reference 2-699