Cisco WS-C3750E-48TD-S Hardware Installation Guide - Page 157
Command-line interface CLI, Return
View all Cisco WS-C3750E-48TD-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Appendix D Quick Setup By Using the CLI-Based Setup Program Entering the Initial Configuration Information ! interface Vlan1 no shutdown ip address 10.4.120.106 255.0.0.0 ! interface FastEthernet1/0/1 ! interface FastEthernet1/0/2 interface FastEthernet1/0/3 ! ... ! interface GigabitEthernet2/0/28 ! end Step 10 These choices are displayed: [0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config. [2] Save this configuration to nvram and exit. If you want to save the configuration and use it the next time the switch reboots, save it in nonvolatile RAM (NVRAM) by selecting option 2. Enter your selection [2]:2 Make your selection, and press Return. After you complete the setup program, the switch can run the default configuration that you created. If you want to change this configuration or want to perform other management tasks, use one of these tools: • Command-line interface (CLI) • CMS from your browser 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide D-13