Cisco WS-C3750X-48P-L Hardware Installation Guide - Page 93
Attaching the RPS Connector Cover,
View all Cisco WS-C3750X-48P-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 3 Switch Installation Installing the Switch Attaching the RPS Connector Cover If you are not using an RPS with your switch, use the two Phillips pan-head screws to attach the RPS connector cover to the back of the switch, as shown in Figure 3-31 and Figure 3-32. Warning If an RPS is not connected to the switch, install an RPS connector cover on the back of the switch. Figure 3-31 Attaching the RPS Connector Cover on the Catalyst 3750G-24TS Switch 86571 STACK 1 STACK 2 CONSOLE [email protected] 1 2 3 1 Phillips pan-head screws 3 RPS connector 2 RPS connector cover 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-33
3-33
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Chapter 3
Switch Installation
Installing the Switch
Attaching the RPS Connector Cover
If you are not using an RPS with your switch, use the two Phillips pan-head
screws to attach the RPS connector cover to the back of the switch, as shown in
Figure 3-31
and
Figure 3-32
.
Warning
If an RPS is not connected to the switch, install an RPS connector cover on the
back of the switch.
Figure 3-31
Attaching the RPS Connector Cover on the Catalyst 3750G-24TS Switch
1
Phillips pan-head screws
3
RPS connector
2
RPS connector cover
CONSOLE
STACK 1
STACK 2
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12v
@8.5a
2
1
3
86571