Cisco WS-C3750X-48P-S Hardware Installation Guide - Page 30
Taking Out What You Need
View all Cisco WS-C3750X-48P-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Taking Out What You Need Chapter 1 Using Express Setup Caution Do not start Express Setup when there are any devices connected to the switch or connect a switch that is already in Express Setup mode to any device other than the PC or workstation that is being used to configure it. The switch acts as a DHCP server during the Express Setup procedure, and only the PC or workstation connected to the switch after Express Startup is started should receive a DHCP address from the switch. Taking Out What You Need Remove the items shown in Figure 1-1 from the shipping container. Figure 1-1 Catalyst 3750 Switch and AC Power Cord 1 SYST RPS MASTR STAT 1X DUPLX SPEED STACK MODE 2X 11X 13X 12X 14X 23X Catalyst 3750 SERIES 24X 97175 2 1 Switch 2 AC power cord You also need to provide an Ethernet (Category 5) straight-through cable (not included), as shown in Figure 1-2, to connect the switch to your PC or workstation. Catalyst 3750 Switch Hardware Installation Guide 1-2 78-15136-02