Cisco WS-SUP720= User Guide - Page 5

Chapter 4 Configuring a Supervisor Engine 720 Configuring and Monitoring the Switch Fabric Functionality These sections describe how to monitor the switch fabric functionality: • Displaying the Switch Fabric Redundancy Status, page 4-5 • Displaying Fabric Channel Switching Modes, page 4-5 • Displaying the Fabric Status, page 4-6 • Displaying the Fabric Utilization, page 4-6 • Displaying Fabric Errors, page 4-7 Displaying the Switch Fabric Redundancy Status To display the switch fabric redundancy status, perform this task: Command Router# show fabric active Purpose Displays switch fabric redundancy status. Router# show fabric active Active fabric card in slot 5 No backup fabric card in the system Router# Displaying Fabric Channel Switching Modes To display the fabric channel switching mode of one or all modules, perform this task: Command Router# show fabric switching-mode [module {slot_number | all] Purpose Displays fabric channel switching mode of one or all modules. This example shows how to display the fabric channel switching mode of module 2: Router# show fabric switching-mode module 2 Module Slot Switching Mode 2 dCEF Router# This example shows how to display the fabric channel switching mode of all modules: Router# show fabric switching-mode Global switching mode is Compact dCEF mode is not enforced for system to operate Fabric module is not required for system to operate Modules are allowed to operate in bus mode Truncated mode is allowed Module Slot 1 2 3 4 5 6 Switching Mode Crossbar dCEF dCEF dCEF Crossbar dCEF OL-3999-08 Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide, Release 12.2SXF 4-5