Cisco WUSB54GS User Guide - Page 13

Chapter 3 Configuration Congratulations Congratulations! The profile is successfully configured. Manual Setup If you are not taking advantage of SecureEasySetup and your network is not listed among the available networks, click Manual Setup on the Available Wireless Network screen to set up the adapter manually. Available Wireless Networks 1. Click Manual Setup on the Available Wireless Networks screen to set up the adapter manually. 2. The Network Settings screen appears. Network Settings If your network has a router or other DHCP server, select Obtain network settings automatically (DHCP). If your network does not have a DHCP server or router, select Specify network settings. Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS addresses, leave these fields empty. IP Address This IP Address must be unique to your network. Subnet Mask The Adapter's Subnet Mask must be the same as your wired network's Subnet Mask. Default Gateway Enter the IP address of your network's Gateway here. DNS 1 and DNS 2 Enter the DNS address of your wired Ethernet network here. Click Next to continue, or click the Back button to return to the previous screen. 3. The Wireless Mode screen shows a choice of two wireless modes. Select Infrastructure Mode if you want to connect to a wireless router or access point. Select Ad-Hoc Mode if you want to connect to another wireless device directly without using a wireless router or access point. Enter the SSID for your network. Wireless-G USB Network Adapter 10