Cisco WUSB54GS Quick Installation Guide - Page 1
Cisco WUSB54GS Manual
![]() |
View all Cisco WUSB54GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
® A Division of Cisco Systems, Inc. 1 Begin Installation IMPORTANT: Do not connect the Adapter to Your PC until you are instructed to do so in Step 2 or the Adapter will not install propertly. The USB Network Adapter is installed and set up using the Setup Wizard that comes on the CD enclosed. Package Contents • Wireless-G USB Network Adapter with SpeedBooster • One Setup CD-ROM • One User Guide on CD-ROM • USB Cable • Quick Installation Guide A To begin, insert the Setup Wizard CD-ROM into your CD- ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. B To install the Adapter, click A Click Here to Start on the Welcome screen. C After reading the License Agreement, click Next to continue the installation and Windows will begin copying the files onto your PC. D The Setup Wizard will now prompt you to connect the C Adapter to your PC's USB port. Proceed to Step 2. 2.4GHz 802.11g Wireless-G USB Network Adapter Wireless with SpeedBooster Quick Installation ModMeloNdoe.l NoW. USB54GS 2 Connect the Adapter Now that the Setup Wizard has prompted you to connect the Adapter, follow the instructions below. A Connect one end of the included USB cable to the Adapter's USB port B Connect the other end of the cable to one of the USB ports on your computer. C The Power LED should light up when the Adapter is plugged in. D Raise the antenna. Make sure the antenna points straight up into the air, at a 90º angle from the Adapter. This will ensure optimum wireless operating range and performance. Once the Adapter is connected, click Next on the Connecting the Adapter screen to proceed. Proceed to Step 3. Connecting the Adapter How to Connect The Adapter's USB Port
![](/manual_guide/products/cisco-wusb54gs-quick-installation-guide-592cc5f/1.png)