Clifford ACE 300 Owners Guide - Page 15

Feature Factory setting Add a new remote to channel 3 - (silent arm/disarm) Add a new remote to channel 4 (optional - remote accessory) Add a new remote to channel 5 - (remote valet mode) Erase all channels - # of flicks & chirps 15 16 17 19 Secondary action Program completion confirmation Result Press remote control button 3 3 chirps Button 3/channel 3 code of the new remote control has been memorized Press remote control button 4 4 chirps Button 4/channel 4 code of the new remote control has been memorized Press the side LevelShift button once, then press button 1 - 5 chirps Button 1/channel 5 code of the new remote control has been memorized 2 chirps All remote control codes have been erased; program in new remote control(s) Example : To change the AutoArming feature from its factory setting of "on" to "off," you would do the following: • Turn the ignition key to the ON position. • Flick the valet switch back and forth 4 times (you'll hear a chirp each time to help you count to the total of 4 chirps). • Wait 3 seconds. The system will sound one more chirp to confirm that the AutoArming setting is now off (1 chirp = off, 2 chirps = on). • Turn the ignition off. That's all there is to it! To change the Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer and program them into the system yourself. Each ACE 300 will respond to as many as four 12-channel ACG remote controls. To add a new remote control to the system, use the procedures noted in the User-selectable features section on pages 13-14. 14