Clifford ACE 500 Owners Guide - Page 17
WARNING, DO NOT change the timer setting
View all Clifford ACE 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Feature Factory setting # of momentary presses Secondary action Program completion confirmation Result Add a new remote to channel 2 - (remote accessory) Add a new remote to channel 3 - (silent arm/disarm) Add a new remote to channel 4 (optional - remote accessory) Add a new remote to channel 5 - (remote valet mode) Add a new remote to channel 6 - (remote headlights) Erase all channels - Set channel 6 timer D 30sec. 14 Press remote control button 2 2 chirps Button 2/channel 2 code of the new remote control has been memorized Button 3/channel 3 code of 15 Press remote control button 3 3 chirps the new remote control has been memorized 16 Press remote control button 4 4 chirps Button 4/channel 4 code of the new remote control has been memorized Press the side LevelShift Button 1/channel 5 code 17 button once, then press 5 chirps of the new remote control button 1 has been memorized Press the side LevelShift Button 2/channel 6 code 18 button once, then press 6 chirps of the new remote control button 2 has been memorized All remote control codes 19 - 2 chirps have been erased; program in new remote control(s) 25 When the desired interval has passed, turn off the ignition key 1 chirp Timer has been set to the interval of your choice between 1sec. and 2min. DWARNING: If the built-in timer controls window/sunroof closure on your vehicle, DO NOT change the timer setting! This requires installer-only programming. Changing the value will adversely effect operation and may cause damage. 16