Clifford Concept 40 Owners Guide - Page 14

How to interpret the chirps and parking light flashes

Page 14 highlights

TO ACTIVATE THE PANIC FEATURE Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from entering. If the ignition is off, the doors will unlock, allowing you to enter immediately without fumbling with your keys. TO REMOTELY TURN ON THE HEADLIGHTS Button 2 (channel 2) controls an electronic interlock that lets you separately command two functions with the same channel: one when the system is armed and another when disarmed. Pressing button 2 while the alarm is armed will optionally turn on the headlights for any duration you wish between one second and two minutes (the factory setting is 30 seconds; see User-selectable features on pages 20-24). TO REMOTELY Button 2 (channel 2) can control another function when the system OPEN THE TRUNK . . . is disarmed, such as an optional remote trunk release. Pressing button 2 while the alarm is disarmed will remotely open the trunk. TO ACTIVATE Button 4 (channel 4) and channels 5-8 (see How to use your OTHER OPTIONS keychain remote control on page 10) can activate accessories REGARDLESS OF such as the IntelliStart remote engine starter, remote power ALARM STATE window control, electric garage door and entry gate opener(s), Concept systems on your other vehicles, etc. What about Channels 9 through 12 control remote valet mode entry/exit (see channels 9 - 12?. . . . page 15), remote override of one or both Proximity Sensor zones (see page 17), and remote adjustment of each of the two Proximity Sensor zones (see page 17). How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and parking light flashes. These chirp/flash acknowledgments mean: Chirps and flashes Meaning 1 Your system is disarmed or you have remotely exited valet mode (see page 15) 2 Your system is armed or you have remotely engaged valet mode (see page 15) 2 and then 4 Armed but there is a door open (if there was a 5-sec. delay) or the sensor is malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 18) 3 Disarmed but there was an intrusion attempt while you were away (see Smart prior intrusion attempt on page 19) 4 Armed but the hood or trunk is ajar (see Smart AutoTesting on page 18) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 (channel 1) for 3 seconds. The parking lights will
flash repeatedly and the siren will blare for 30 or 60 seconds
(user-selectable), or until you press button 1 again to turn it off. If
the ignition is on (indicating you are in the car), the doors will
automatically lock to prevent an assailant from entering. If the
ignition is off, the doors will unlock, allowing you to enter
immediately without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS. . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command
two
functions with the same channel:
one
when the system is armed and another when disarmed
. Pressing
button 2 while the alarm is
armed
will optionally turn on the
headlights for any duration you wish between one second and two
minutes (the factory setting is 30 seconds; see
User-selectable
features
on pages 20-24).
TO REMOTELY
OPEN THE TRUNK . . .
Button 2 (channel 2) can control another function when the system
is
disarmed
, such as an optional remote trunk release. Pressing
button 2 while the alarm is
disarmed
will remotely open the trunk.
TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE. . . . . . .
Button 4 (channel 4) and channels 5–8 (see
How to use your
keychain remote control
on page 10) can activate accessories
such as the IntelliStart remote engine starter, remote power
window control, electric garage door and entry gate opener(s),
Concept systems on your other vehicles, etc.
What about
channels 9 – 12?. . . .
Channels 9 through 12 control remote valet mode entry/exit (see
page 15), remote override of one or both Proximity Sensor zones
(see page 17), and remote adjustment of each of the two
Proximity Sensor zones (see page 17).
How to interpret the chirps and parking light flashes
When you use the remote control, the system responds with chirps (unless the chirp muting
feature is turned on) and parking light flashes.
These chirp/flash acknowledgments mean:
Chirps and flashes
Meaning
1
Your system is disarmed
or
you have remotely exited valet mode (see page 15)
2
Your system is armed
or
you have remotely engaged valet mode (see page 15)
2 and then 4
Armed but there is a door open (if there was a 5-sec. delay) or the sensor is
malfunctioning (if there was a 10-sec. delay) (see
Smart AutoTesting
on page 18)
3
Disarmed but there was an intrusion attempt while you were away
(see
Smart prior intrusion attempt
on page 19)
4
Armed but the hood or trunk is ajar (see
Smart AutoTesting
on page 18)
12