Clifford Concept 600 Owners Guide - Page 10

NightVision™ All of the following NightVision Headlight Automation features are built into your Concept 600: n User-selectability: You may turn the NightVision features on or off whenever you wish (see User-selectable features). n While driving at dusk: The system automatically turns on the headlights. n While driving at dawn: The system automatically turns off the headlights. n User-selectable activation threshold: The NightVision electronics have a preset threshold that automatically turns on the headlights at about the same time as the public street lights turn on. If you find that your vehicle's headlights come on significantly earlier or later than the street lights, you may change NightVision's headlight activation threshold. See the User-selectable features (column 3, row 7) to change the threshold. To set the headlights to turn on when it is darker, select the "darker" setting, to have them turn on when it is lighter, select the "lighter" setting. The CliffNet Wizard software provides even greater incremental activation threshold control. n Intelligent activation: The NightVision electronics automatically turn the headlights on or off only when necessary. For instance, if it is dark when the car's engine is started, NightVision instantly turns on the headlights. When the vehicle is briefly driven under an overpass in daylight, the headlights will not turn on. Even more importantly, when passing through a brightly lit area at night, the headlights will not switch off. However, if you drive into a dark parking structure during the day, NightVision will turn on the headlights within five seconds of entering the structure. n When parking at night: NightVision keep the headlights on for any post-parking duration between one second and 4 minutes (factory preset to 10 sec.; see User-selectable features column 3, row 5) after you turn off the engine to light your path away from the vehicle. If you don't care for this feature, you may use the User-selectable features programming (column 3, row 6) to select all NightVision features except post-parking illumination. n Remote timed headlight activation: Pressing button 4 on your master remote or button (companion remote) will activate the headlights for any duration you select between 1 sec. and 4 min. (factory preset to 10 sec.; to change the duration, see User-selectable features column 3, row 5). n RainCheck: When you turn on the windshield wipers NightVision automatically turn on the headlights to increase your vehicle's visibility to all other drivers on the road. This is also a great battery-saving feature since you don't need to remember to turn off the headlights after driving in the rain during daylight hours. If using intermittent wipers, just measure the maximum amount of time between wiper activations, add a second, then program the Headlight Duration (feature column 3, row 5) for that amount of time using the User-selectable features. n Manual control of headlights: If you wish to manually turn on the headlights, simply turn on your vehicle's headlight switch. Optional CliffNet Wizard™ & DataPort Interface Connector If you opted to have the Clifford DataPort interface connector installed with your system, you can use our CliffNet Wizard software to access your system through your Windows PC. CliffNet Wizard will show you, on your PC screen, all your user-programmable feature settings. You can change settings simply by mouse-clicking the graphical button for each feature. You can customize features, add or delete remote controls, change remote control button assignments, view a chronological history of trigger and sensor activations, and much more. It's actually fun! And secure. To learn more and download this free software, go to www.clifford.com/wizard. Smart AutoTesting™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open, the system will immediately sound 4 chirps and 4 indicator light flashes instead of the usual 2 and 2. If a door is ajar, you'll receive 2 chirps and 2 flashes, then, 5 seconds later, there will be 4 chirps and 4 flashes. If a sensor is malfunctioning, you will receive the usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Since this is a warning indication, you will hear the 4 chirps even if you use the chirp muting feature. n Specific malfunction identification: The system can also indicate the specific trigger or sensor that is malfunctioning. If you get the 4-chirp/4-flash signal upon arming, perform the following to identify the malfunctioning trigger or sensor: 1. Remotely disarm, then turn on the ignition. The LED status indicator inside your vehicle will be flashing, pause, then repeat. 2. Count the number of flashes in one cycle between pauses (for your convenience, the flash cycle repeats a total of 5 times) and refer to the chart below: LED flashes 1 flash 2 flashes 3 flashes 4 flashes* 5 flashes 6 flashes 7 flashes 8 flashes 9 flashes 10 flashes Meaning Activation of the Proximity Sensor Activation of the OmniSensor Activation of the optional Tilt/Motion Sensor Door open/ajar Trunk open/ajar Hood open/ajar Ignition switch was turned on while the system was armed Three or more incorrect valet codes were entered BlackJax anti-carjacking countermeasure was triggered Power tampering or the vehicle battery is very low * If your vehicle has a factory-installed feature that turns off or dims the interior courtesy lights several seconds after you exit the vehicle, the system cannot provide this indication.