Clifford GP1000T Owners Guide - Page 11

disarming To disarm the system, press . You will hear a chirp and the indica- tor lights will flash once. If the siren chirps three times when disarming, refer to the Diagnostics section of this guide. This is called Tamper Alert. If the siren is active (sounding) when the system is disarmed you will hear two or four chirps but the system is not disarmed. (Refer to the Remote Siren Silencing section of this guide.) However, if the alarm completes the full trigger cycle when disarmed you will hear three chirps. disarming without a remote This feature allows you to disarm the system without the remote should it be lost, damaged, or disabled. In order to disarm without a remote, you must have the motorcycle's ignition key, know where the Valet switch is located, and have the PIN code. Be sure to check with the installer for the location of the Valet switch. Turn the ignition On and then enter the PIN code as given in the following example to disarm without a remote. 1. Find the preset PIN code noted on the back of this manual. FOR EXAMPLE: To disarm first enter a PIN code of 4301. 2. Turn the ignition On. 3. Press four times. 4. Then once. This enters the digit 4. 5. Then three times. 6. Then once. This enters the digit 3. 8