Clifford Matrix 10 Owners Guide - Page 19
one-time bypass - alarm
View all Clifford Matrix 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
To enter or exit Valet Mode using the transmitter: 1. Open any vehicle door. 2. Press . 3. Press . 4. Press again. The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode. ➜ one-time bypass This feature stops the alarm from arming or activating any outputs that are programmed to activate when the alarm is armed. One-time bypass will defeat the following actions: Passive arming: If programmed ON the alarm will not arm itself. If the remote is used to arm the alarm after exiting the vehicle: Window roll up: If programmed ON this output will not activate. Linked Auxiliary Outputs: If programmed to activate on arm, they will not activate. To activate one-time bypass: 1. After parking turn the ignition off. 2. Turn the ignition On for more than 1-second and less than 3-seconds. 3. The siren will chirp once to indicate one-time bypass has been activated. 20 © 2005 directed electronics, inc.