Clifford Matrix 3 Owners Guide - Page 22

If programmed for passive arming, a feature called Smart Relocking will occur when the system is disarmed without opening a door, so that the doors will automatically lock when the system passively rearms. ➤ Arming/disarming confirmation siren chirps on or off. ➤ Auto-Lock/Auto-Unlock on or off: With this feature on, the doors will lock three seconds after the ignition is turned on, and unlock when the ignition is turned off. The system will prevent the doors from locking when the ignition is turned on with any door open. If your installer is programming the security system with the Directed® Bitwriter or a personal computer and the TechSoft Programmer, ignition lock and unlock are independent features and can be programmed separately. ➤ Passive door locking (with passive arming) or active door locking (only when arming with the transmitter). Passive locking allows the vehicle's doors to lock when the security system passively arms (after the 30 second countdown). This feature only works if passive arming has been programmed. ➤ Panic mode enabled/disabled with the ignition on: Some states have laws against siren capability in a moving vehicle. ➤ Forced passive arming on or off: If your system is programmed for passive arming and the forced passive arming feature has been programmed on, the system will passively arm after one hour, even if a protected entry has been left open. This feature is useful if a door has been left ajar when leaving the vehicle. Forced passive arming ensures that the security system will be armed in every situation. © 2001 directed electronics, inc. 19