Clifford Matrix RS Owners Guide - Page 15
valet take-over
View all Clifford Matrix RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
➤ The shutdown toggle switch is put into the OFF position. ➤ The pre-programmed run time (12, 24, or 60 minutes) has elapsed. ➤ is pressed during remote start operation. To shut down the remote start and turn off the engine: ➤ Step on the brake pedal, or ➤ Press for one second. ➜ valet take-over The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on. To perform Valet Take-Over: 1. Before turning off the engine, press and release on the transmitter (or press and release the optional momentary switch). 2. Turn the ignition key to the OFF position. (The engine will stay running.) 3. The engine will run until the pre-programmed time elapses or a shut-down input is received. (See the previous Remote Engine Starting section for a complete list of shut-down inputs.) 12 © 2001 directed electronics, inc.