Clifford XL4000 Owners Guide - Page 14

How to interpret the chirps and parking light flashes

Page 14 highlights

TO ACTIVATE THE PANIC FEATURE Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from entering. If the ignition is off, the doors will unlock, allowing you to enter immediately without fumbling with your keys. TO REMOTELY TURN ON THE HEADLIGHTS Button 2 (channel 2) controls an electronic interlock that lets you separately command two functions with the same channel: one when the system is armed and another when disarmed. Pressing button 2 while the alarm is armed will optionally turn on the headlights for any duration you wish between one second and two minutes (the factory setting is 30 seconds; see User-selectable features on pages 20-24). TO REMOTELY OPEN THE TRUNK . . . Button 2 (channel 2) can control another function when the system is disarmed, such as an optional remote trunk release. Pressing button 2 while the alarm is disarmed will remotely open the trunk. TO ACTIVATE Button 4 (channel 4) and channels 5-8 and 10 (see How to use OTHER OPTIONS your keychain remote control on page 10) can activate REGARDLESS OF accessories such as the IntelliStart remote engine starter, remote ALARM STATE power window control, electric garage door and entry gate opener(s), XL4000 systems on your other vehicles, etc. What about Channels 9, 11 and 12 control remote valet mode entry/exit (see channels page 15) and remote adjustment of each of the two Piezo Sensor 9, 11 and 12 zones (see page 17). How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and parking light flashes: Chirps and flashes Meaning 1 Your system is disarmed or you have remotely exited valet mode (see page 15) 2 Your system is armed or you have remotely engaged valet mode (see page 15) 2 and then 4 Armed but there is a door open (if there was a 5-sec. delay) or the sensor is malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 17) 3 Disarmed but there was an intrusion attempt while you were away (see Smart prior intrusion attempt on page 18) 4 Armed but the hood or trunk is ajar (see Smart AutoTesting on page 17) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 (channel 1) for 3 seconds. The parking lights will
flash repeatedly and the siren will blare for 30 or 60 seconds
(user-selectable), or until you press button 1 again to turn it off. If
the ignition is on (indicating you are in the car), the doors will
automatically lock to prevent an assailant from entering. If the
ignition is off, the doors will unlock, allowing you to enter
immediately without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS. . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two functions with the same channel: one
when the system is armed and another when disarmed. Pressing
button 2 while the alarm is armed will optionally turn on the
headlights for any duration you wish between one second and two
minutes (the factory setting is 30 seconds; see User-selectable
features on pages 20-24).
TO REMOTELY
OPEN THE TRUNK . . .
Button 2 (channel 2) can control another function when the
system is disarmed, such as an optional remote trunk release.
Pressing button 2 while the alarm is disarmed will remotely open
the trunk.
TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE. . . . . . .
Button 4 (channel 4) and channels 5–8 and 10 (see How to use
your keychain remote control on page 10) can activate
accessories such as the IntelliStart remote engine starter, remote
power window control, electric garage door and entry gate
opener(s), XL4000 systems on your other vehicles, etc.
What about
channels
9, 11 and 12?. . . . . . .
Channels 9, 11 and 12 control remote valet mode entry/exit (see
page 15) and remote adjustment of each of the two Piezo Sensor
zones (see page 17).
How to interpret the chirps and parking light flashes
When you use the remote control, the system responds with chirps (unless the chirp
muting feature is turned on) and parking light flashes:
Chirps and flashes
Meaning
1
Your system is disarmed or you have remotely exited valet mode (see page 15)
2
Your system is armed or you have remotely engaged valet mode (see page 15)
2 and then 4
Armed but there is a door open (if there was a 5-sec. delay) or the sensor is
malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 17)
3
Disarmed but there was an intrusion attempt while you were away
(see Smart prior intrusion attempt on page 18)
4
Armed but the hood or trunk is ajar (see Smart AutoTesting on page 17)
12