Clifford XL500 Owners Guide - Page 7
User-selectable features, Programming table for user-selectable features
View all Clifford XL500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
User-selectable features Your XL500 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below. To change any of the settings, use the procedure noted. To restore the feature to its factory setting, just repeat the procedure: 1. Select the feature you wish to program from the table below and on the following page. Note the number of flicks and chirps associated with that feature. 2. Turn your vehicle's ignition switch to its "ON" position. 3. Immediately flick the valet switch back and forth, counting the number of chirps you hear. Stop when you reach the number associated with the feature you selected. 4. If noted, perform the "secondary action." 5. After a 3-second pause, you will hear 1 chirp to confirm that you have changed the setting of the feature. Turn the ignition off. 6. Repeat steps 1-5 for any other features you wish to program. Programming table for user-selectable features Feature Factory setting # of flicks and chirps Secondary action Program completion confirmation Result AutoArming ON 4 AutoArm & Lock OFF 5 FACT - False Alarm Control and ON 12 Test - 1 chirp 3 seconds after last step Change state from ON to OFF or vice-versa - 1 chirp 3 seconds after last step Change state from ON to OFF or vice-versa - 1 chirp 3 seconds after last tap Change state from OFF to ON or vice-versa Add a New Remote to Channel 1 - (arm/disarm) 13 Press remote control button I 1 chirp Button I/channel 1 code of the new remote control has been memorized Add a New Remote to Channel 2 - (remote accessory) Button II/channel 2 code 14 Press remote control button II 2 chirps of the new remote control has been memorized Add a New Remote to Channel 3 - (silent 15 Simultaneously press remote control buttons I+II 3 chirps Buttons I+II/channel 3 code of the new remote control has been memorized arm/disarm) 6