Cobra 6000 PRO HD Quick Start Guide - Page 2
Start Up, Mount the Unit - - 5 gps
View all Cobra 6000 PRO HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Start Up IMPORTANT! It is the user's responsibility to account for the vehicle's height, width, length, HAZMAT, and other restrictions while driving. Always follow posted road signs and be aware of road conditions when making driving decisions. Please read the "Important Safety Information" included with your unit. Power Key Reset Button Micro-SD Card Slot Mini-USBPower Port Mount the Unit You can mount your 6000 PRO HD to the inside of your vehicle's windshield using the windshield bracket provided. • Clean the area where you wish to position the bracket thoroughly with glass cleaner. • Assemble the suction cup bracket. Slide the mount clip onto the end of the suction cup arm. • Place the suction cup and bracket on the windshield and push the locking lever towards the windshield to secure the bracket. • Adjust the angle of the bracket so that when the unit is attached to it you can view the display and operate the controls safely. • Do not place the mount in an airbag deployment area. To charge the unit, connect either the AC or DC Power Adapter. Once fully charged the battery will last approximately 2 hours during normal use. NOTE: Mounting your 6000 PRO HD in close proximity to a CB radio may interfere with GPS reception. Should you encounter such interference, position your 6000 PRO HD as far away from your CB radio as possible. NOTE: Turn the unit ON or OFF by pressing the Power Key for 2 seconds. Printed in China Part No. 480-793-P Version B