Cobra C 75 WX ST 75WXST - Page 5

Installation

Page 5 highlights

INSTALLATION CONNECTOR BOX 8 MOUNTING CONNECTOR BOX 1. Hold Cobra 75 WX ST Connector Box in exact location desired for mounting. 2. Using it as a template, mark the location for the mounting screws (included). NOTE: Make certain that nothing will interfere with the installation of the mounting screws, before drilling holes. 3. Mount Connector Box as shown. CONNECTING WIRES 1. Connect the antenna cable connector. INSTALLATION CONNECTOR BOX 9 2. Connect the red wire marked "BATT" (+) directly to the positive side of the battery or to a connection on the fuse box that is always on. 3. Connect the black wire marked "Ground" (-) to the negative side of the car, usually the chassis. Any other location with good electrical contact (paint removed) will also work. CAUTION: Leaving the 75 WX ST on after your car is turned off can drain your car battery when connected to a constant 12 volt source. When connected to accessory 12 volt source unit will turn off.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

INSTALLATION
CONNECTOR BOX
9
INSTALLATION
CONNECTOR BOX
8
MOUNTING
CONNECTOR BOX
1.
Hold Cobra 75 WX ST
Connector Box in exact
location desired for
mounting.
2.
Using it as a template,
mark the location
for
the mounting screws
(included).
NOTE:
Make certain that
nothing will interfere with
the installation of the
mounting screws, before
drilling holes.
3.
Mount Connector Box
as shown.
CONNECTING WIRES
1.
Connect the antenna
cable connector.
2.
Connect the red wire
marked “BATT” (+)
directly to the positive
side of the battery or to a
connection on the fuse
box that is always on.
3.
Connect the black wire
marked “Ground” (-) to
the negative side of the
car, usually the chassis.
Any other location with
good electrical contact
(paint removed) will
also work.
CAUTION:
Leaving the 75 WX ST on after your car is turned off can
drain your car battery when connected to a constant 12
volt source. When connected to accessory 12 volt source
unit will turn off.