Cobra CXT545 Owners Manual - Page 7
Mode Functions
View all Cobra CXT545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Mode Functions OperatioHnI / LO SCAN Set DCS Privacy Codes • Mode/Power To select a DCS privacy code: 1. After selecting a channel, press the Mode/Power button until the DCS icon appears and the small numbers flash on the display (01 through 83). DCS Privacy Code ChaHI /nLOnelSCBANutton If CTCSS is turned on at the channel selected, the display will flash the DCS icon and "OFF." To switch from CTCSS to DCS, press the Channel Up or Channel Down button while the display is flashing "OFF." The display will then show the small numbers flashing and you will then be able to proceed to step 2. 2. Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance. 3. When DCS privacy code is displayed, choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions. b. Press and hold the Mode button to enter the new setting and return to Standby mode. c. Press Talk or Call/Lock button to enter the new setting and return to Standby mode. d. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode. 8 Introduction Operation Customer Assistance Warranty Voice Activated Transmit (VOX) • In VOX mode, your microTALK® radio can be used "hands-free," automatically transmittHIi/nLOg when SCAN you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. Mode/Power To turn VOX mode on or off: 1. Press the Mode/Power button until the VOX icon flashes on the display. The current On or Off setting is displayed. VOX Icon 2. Press the Channel Up or Channel Down button to turn VOX On or Off. 3. Choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions. ChHaI / LnO nelSCABN utton b. Press and hold the Mode button to enter the new setting and return to Standby mode. HI / LO SCAN c. Press Talk or Call/Lock button to enter the new setting and return to Standby mode. Mode/Power d. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode. To set VOX sensitivity: 1. Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed. VOX Sensitivity Level The current VOX sensitivity level is displayed with letters "LE" and a Number 1 through 5, with Number 5 being the most sensitive level and Number 1 being the least sensitive level. ChHaI / LnO nelSCABN utton 2. Press the Channel Up or Channel Down button to change the setting. 3. Choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions. b. Press and hold the Mode button to enter the new setting and return to Standby mode. c. Press Talk or Call/Lock button to enter the new setting and return to Standby mode. d. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode. Nothing Comes Close to a Cobra® 9