Cobra MR F45-D MRF45D_MANL_ENG - Page 22
Digital Select Calling DSC, Setup
View all Cobra MR F45-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Operating Your Radio Digital Select Calling (DSC) Setup Digital Select Calling (DSC) Setup • Digital Selective Calling (DSC) uses digital signals to increase messaging range. This provides the most reliable message delivery per watt of output power. Digital signals are less susceptible to distortion from noise and atmospheric conditions than analog signals. DSC equipped radios also interface with GPS and automate many operations for sending and receiving messages. This results in compact, accurate messages and less airwave congestion. Setup procedures for all DSC features use the Setup menu. Refer to page 40 for information on entering and exiting the Setup menu. User MMSI Number The nine (9) digit MMSI number, similar to a telephone number, is a unique identifier for a vessel. DSC incorporates this number into every message that is Sent (Tx) or Received (Rx). Enter the MMSI number as soon as you receive your MMSI number from the issuing agency listed on page 9. NOTE The radio does not operate in the DSC mode until an official MMSI number is entered. An error tone will sound when attempting to operate in the DSC mode without an MMSI number. NOTE An MMSI number can only be entered one time. To create a new MMSI number, the unit must be reset by the dealer. Operating Your Radio User MMSI User MMSI ID Entry Digital Select Calling (DSC) Setup To Enter Your MMSI Number: 1. Enter the Settings menu and scroll to USER MMSI with the Up/Down buttons. 2. Press the Call/Set button and the blinking cursor will appear at the first digit under USER MMSI ID ENTRY. 3. Use the Up/Down buttons to scroll through the number list to that digit of your number. 4. Press the Call/Set button to select the digit and the blinking cursor will move to the next digit of the number. 5. Repeat steps 3 and 4 until all nine (9) digits of your MMSI number are entered. NOTE Press the High/Low Power button to backspace and erase the last selected number. 6. Check that you have entered the number correctly. The unit will ask you to re-enter your number to confirm. 7. Press and hold the Call/Set button to return to the Settings menu. 38 English Nothing Comes Close to a Cobra® 39