Cobra PURE SINE 400W PURESINE 400W Manual - Page 13

CONNECTING TO THE 12V ACCESSORY 1. Mount your inverter in a well-ventilated area of vehicle. 2. Remove the thumb cap on the inverter for each terminal. 3. Connect the RED (+) 12V Accessory Cable ring to the RED (+) inverter terminal. 4. Screw the thumb cap back on the RED (+) inverter terminal. 5. Connect the BLACK (-) 12V Accessory Cable ring to the BLACK (-) inverter terminal. 6. Screw the thumb cap back on the BLACK (-) inverter terminal. 7. Make sure the inverter is in the OFF position "O". 8. Plug the 12V Accessory Cable into vehicle accessory port*. 9. When turning your inverter ON, place the power switch into the ON or "-" position by pressing the left side of the switch. When turning your inverter OFF, place the power switch into the OFF or "O" position by pressing the right side of the Power Switch. 13 | P a g e