Coby CD450 User Manual - Page 2

Maintenance, Introduction, Power, Supply

Page 2 highlights

IMPORTANT SAFEGUARDS Always operate the product from a power supply of the same voltage, frequency and rating as indicated on the product identification plate. Do not operate product with a damaged cord or plug. Never install the unit where there are heat sources such as radiators, heat registers, stoves, direct sunlight, excessive dust or where there is mechanical vibration or shock. Switch off and unplug from AC outlet when not in use. IMPORTANT The CD mechanism and the sensitive circuitry may cause interference to a radio tuner nearby. Do not operate this unit while operating other radio devices. Danger This product utilizes invisible laser radiation. Avoid direct exposure to the beam. Caution Use of controls, adjustments or procedures not listed in this manual may result in hazardous radiation exposure. CONCERNING COMPACT DISCS Only compact discs identified with this mark can be used with this player. 6( riACT DIGITAL AUDIO CARE and MAINTENANCE Handle your unit with care to extend the life of the unit. Use a soft and clean cloth damped with plain lukewarm water to clean the exterior of the unit. Never use solvents such as benzene or other strong chemical cleaners since these could damage your unit. It is important that no liquid reaches the inside of the unit. Do not touch the CD laser part or look directly at it. INTRODUCTION Please read and follow the instruction manual carefully before operating in order to avoid any damage to the unit. POWER SUPPLY 1.By using AC power Insert one end of the AC power cord into the AC socket on the rear of the unit and the other end into a standard wall socket. 2.By using batteries Insert 8x"D"size batteries (not included) in the battery compartment in the back of the unit by matching the polarities. • The unit will not operate on battery power when the AC power cord is plugged into the AC socket. • Replace batteries when the power indicator dims, the volume decreases or the sound distorts. • Use batteries of high quality and check them regularly. Alkaline batteries are recommended. • Do not mix new batteries with old or used batteries. • Use only batteries of the same brand and type • Batteries should not be left in the unit if they are exhausted or if the unit is not to be used for a long period of time as they may leak and damage the unit. Battery leakage is not covered under the warranty.

  • 1
  • 2
  • 3
  • 4
  • 5

IMPORTANT
SAFEGUARDS
Always
operate
the
product
from
a
power
supply
of
the
same
voltage,
frequency
and
rating
as
indicated
on
the
product
identification
plate.
Do
not
operate
product
with
a
damaged
cord
or
plug.
Never
install
the
unit
where
there
are
heat
sources
such
as
radiators,
heat
registers,
stoves,
direct sunlight,
excessive
dust
or
where
there
is
mechanical
vibration
or
shock.
Switch
off
and
unplug
from
AC
outlet
when
not
in
use.
IMPORTANT
The
CD
mechanism
and
the
sensitive
circuitry
may
cause
interference
to
a
radio
tuner
nearby.
Do
not
operate
this
unit
while
operating
other
radio
devices.
Danger
This
product
utilizes
invisible
laser
radiation.
Avoid
direct
exposure
to
the
beam.
Caution
Use
of
controls,
adjustments
or
procedures
not
listed
in
this
manual
may
result
in
hazardous
radiation
exposure.
CONCERNING
COMPACT
DISCS
Only
compact
discs
identified
with
this
mark
can
be
used
with
this
player.
(
6
riACT
DIGITAL
AUDIO
CARE
and
MAINTENANCE
Handle
your
unit
with
care
to
extend
the
life
of
the
unit.
Use
a
soft
and
clean
cloth
damped
with
plain
lukewarm
water
to
clean
the
exterior
of
the
unit.
Never
use
solvents
such
as
benzene
or
other
strong
chemical
cleaners
since
these
could
damage
your
unit.
It
is
important
that
no
liquid
reaches
the
inside
of
the
unit.
Do
not
touch
the
CD
laser
part
or
look
directly
at
it.
INTRODUCTION
Please
read
and
follow
the
instruction
manual
carefully
be-
fore
operating
in
order
to
avoid
any
damage
to
the
unit.
POWER
SUPPLY
1.By
using
AC
power
Insert
one
end
of
the
AC
power
cord
into
the
AC
socket
on
the
rear
of
the
unit
and
the
other
end
into
a
standard
wall
socket.
2.By
using
batteries
Insert
8x"D"size
batteries
(not
included)
in
the
battery
compartment
in
the
back
of
the
unit
by
matching
the
polarities.
The
unit
will
not
operate
on
battery
power
when
the
AC
power
cord
is
plugged
into
the
AC
socket.
Replace
batteries
when
the
power
indicator
dims,
the
volume
decreases
or
the
sound
distorts.
Use
batteries
of
high
quality
and
check
them
regularly. Alkaline
batteries
are
recommended.
Do
not
mix
new
batteries
with
old
or
used
batteries.
Use
only
batteries
of
the
same
brand
and
type
Batteries
should
not
be
left
in
the
unit
if
they
are
exhausted
or
if
the
unit
is
not
to
be
used
for
a
long
period
of
time
as
they
may
leak
and
damage
the
unit.
Battery
leakage
is
not
covered
under
the
warranty.